1. Welcome SANCHOW?CHEMICALS?CO.,?LTD HomePage!
                    Serive Tel:13928160655
                    +86-719-5716269
                    Sanchow
                    contact us
                    CEO:Mr?Zhou
                    Mobi:13928160655
                    Tel:+86-719-5716269
                    Fax:+86-719-5716329
                    Mail:13597868869@163.com
                    Addr:LIULIPING,?SHIYAN,?HUBEI?442716,?CHINA
                    MR-2811N
                    Product Details

                    TECHNICAL DATA

                    SANCHOW RELEASE AGENT

                    MR-2811N

                     

                    INTRODUCTION

                    SANCHOW release agent is the product of Sanchow Chemicals Co., Ltd for use in the molding of unsaturated polyester resins and vinylester resins.

                    SANCHOW release agent is primarily recommended as internal release additive for use in those types of molding operations where external heat is applied during the curing cycle and are not recommended generally for room temperature curing systems.

                    SANCHOW release agent is incorporated directly into the resin eliminating the need for an external mold release agent, improving resin flow and line speeds, reducing release agent cost on a utility basis when compared with other, more conventional internal release agents. An effective addition of SANCHOW release agent will not have any adverse affect on the curing and cured resin. It will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating. It can also protect ferrous metal molds from corrosion during storage. It is especially effective when used in low shrink polyester or vinylester resins which produce exceptionally smooth surfaces when cast.

                    PROPERTIES

                    Chemical Composition

                    Organic Phosphate, Partial Neutralized

                    Effective Ingredients

                    100%

                    Physical Appearance

                    Pale Yellow or Colorless Liquid

                    Odor

                    Mild, fatty alcohol

                    Density

                    1.01±0.02g/ml @25C

                    Viscosity

                    2500~3500cps @25C

                    PH, 1% in deionized water

                    3.5~5.0 @25C

                    Flash Point

                    Non Flammable

                    Solubility

                    Miscible with UP and VE resins

                    Shelf Life

                    Minimum of one year

                      

                     

                     

                     

                    All information given by us about our products is based upon our tests and experience. It is intended for use by persons having technical skill at their own discretion and risk, and we assume no liability in connection with their use.

                     

                     

                    APPLICATION INSTRUCTIONS

                    General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. SANCHOW release agent is effective with a range of 0.5 to 1.5 parts per 100 resin by weight, excluding reinforcements, pigments and fillers. High amount of filler may require a higher percentage of internal release than the indicated maximum.

                    Mixing: Mix into resin prior to addition of catalysts, fillers, and other resin additives.

                    PERSONAL SAFETY AND FIRST AID   

                    Health Hazards: MR-2811N causes burns to the eyes and skin. Undiluted, it is corrosive to rabbit skin. It has a low acute oral toxicity.

                    Safety Precautions: Do not get it in the eyes or on the skin. Use rubber gloves and adequate eye protection.   

                    First Aid: In case of contact, flush the eyes or skin immediately with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before reuse.

                    STORAGE AND HANDLING

                    It should be stored in a cool dry place and kept closed to prevent contamination.

                     

                     

                    Sanchow Chemicals Co., Ltd

                    Add: Liulipin, Shiyan, Hubei 442716, China

                    Tel: +86-719-5716269

                    Fax: +86-719-5716329

                    E-mail: 13597868869@163.com

                     

                    成人爽a毛片一区二区免费|国产l精品国产|国产精品国语对白露脸在线播放|中文字幕免费的日本视频○l|午国产午夜激无码AV